The Hobart L800 came into the diner used, back when the doors opened over 25 years ago, and it has outlasted every menu, every cook and most of the equipment around it. It mixes sourdough, batters, dressings, sauces, butters and frosting, in batches big enough to fill an 80-quart bowl. It runs about every other day, and some days it runs all day. In all those years it has never been down.
What the L800 Is



A medium-duty 80-quart mixer built for general kitchen work
Hobart’s own manual calls the L800 a medium-duty 80-quart mixer designed primarily for general kitchen applications, with a timer and a #12 attachment hub as standard equipment. Bowl adapters let it take 30-, 40- or 60-quart bowls. The same manual lists a bowl guard as standard on every L800 and warns against running it without the interlocked guard.
The L800 spec sheet fills in the rest: four fixed speeds, a gear-driven transmission, a 15-minute timer, an open base, large front controls and a manual bowl lift. An 80-quart stainless bowl, a “B” flat beater, a “D” wire whip and an “ED” dough hook make up the full set.
The motor is where the paperwork disagrees with itself. Hobart’s sheet lists 2 HP. Used units turn up listed at 1.5 HP and 2 HP. The plate on the diner’s machine reads 1.5 HP.
One pre-owned listing puts the footprint at 27 inches wide, 38 deep and 58 high, and the weight at 875 pounds. Nobody rearranges the kitchen around a machine like that. The kitchen gets arranged around the machine.
25 Years in a Diner Bakery
Sourdough, sauces and frosting on the same machine
The diner runs a full bakery, and the L800 sits in the middle of it. The bakers use it for sourdough and batters. The chefs use it for dressings, sauces and butters, and for frosting when the pastry side needs it, always in large batches. The sauces keep the chefs at the mixer almost as often as the bakers.
The machine came used. It has had little maintenance, and the motor and the electrical parts have never been replaced. Hobart says the average Classic commercial mixer in service is 24 years old. This one is past that mark and still running on the original motor.
Peter calls it built like a horse, made to run the toughest jobs, and that is about as technical as the praise gets. The paint is worn. The base shows rust. None of that touches the mixing.
Twenty-five years without a replaced motor says something about the steel and something about luck. A buyer of a used L800 gets the steel. The luck does not transfer.



Power, Speeds and the Timer
Filled to the rim, and it does not bog down
The test for a mixer is a full bowl of dough. The diner fills the 80-quart bowl to the rim, and the L800 takes it on low and on high without bogging down. A 1.5 HP motor sounds modest next to the 3 HP in the newer Legacy line, and in this kitchen the number has not mattered.
That is one kitchen’s practice, not a rating. Hobart’s operating manual sets the limits for any machine, and a used unit in different shape deserves a careful read of it first.
The four fixed speeds do the work a variable dial does elsewhere. Each batch gets its own routine: low to bring the ingredients together, then up through the speeds as the job calls for. Time on each speed runs anywhere from 5 to 15 minutes, depending on what is in the bowl.
The timer sits on the panel with its start and stop buttons, and the dial reads “turn past 3, then set time.” The diner does not rely on it. The cook who is standing there watches the mix and shuts it off when it looks right. The timer is there for anyone who wants it, and for a kitchen that follows recipe times to the minute it would earn its place.
The Crank, the Hub and Cleaning
A manual lift on a machine that never needed a power one
The bowl goes up and down by hand crank. On paper, a manual lift is the weak spot next to the power bowl lift on the newer Legacy models. In the kitchen it is the part Peter would miss. Cranking a full bowl makes it feel like working with a very old machine, which is sort of cool, and it is not hard.
The #12 attachment hub on the side of the head is standard, and the diner does not use it. The slicer and grinder attachments that fit a hub like that are a separate purchase, and a short video on Hobart attachment hubs from Chefs’ Toys covers what they do. Hubs also age. One used-equipment seller notes a unit with an attachment hub that was not working properly. A buyer who plans to use the hub should test it before paying.
The diner owns every attachment and uses only the 80-quart bowl. The smaller-bowl adapters stay in the drawer.
Cleaning is easy. The open base and the plain surfaces give a cloth and a scraper nothing to hide behind, and a machine that old has had decades of practice at being wiped down.




Attachments and Replacement Parts
The set the diner runs every day
Four pieces do the daily work, and all of them fit the L800.
- ALFA 80B 80-Quart Aluminum Beater Paddle: the flat beater, a direct replacement for Hobart 00-275448 that Amazon lists for the L800, L800D and M802. See it on Amazon (affiliate link)
- ALFA 80VBWL 80-Quart Stainless Steel Mixer Bowl: the bowl, a replacement for Hobart 275690 listed for the L800 and M802. See it on Amazon (affiliate link)
- National Band Saw Spiral Dough Hook, OEM 00-295174: the ED-style spiral hook, which the listing names L800 compatible. See it on Amazon (affiliate link)
A wire whip completes the set for whipping frostings and dressings. An 80-quart whip sold for the L800 and M802 is the right size, and a 20-quart whip will not fit an 80-quart bowl.
As an Amazon Associate I earn from qualifying purchases. A commission may be earned if you buy through this link, at no extra cost to you.
Parts for the machine itself are easier to find than the machine. Parts Town lists 504 items for the L800, from worm gears and bowl lift nuts to bowl guards and scraper kits, along with manuals and diagrams.
L800 Compared With the Newer Hobart Legacy HL800
Power lift and a smart timer for several times the money
The L800 belongs to Hobart’s Classic line. The current 80-quart machine is the Legacy HL800, and the two differ in ways a buyer should know.
| L800 | HL800-1STD | |
|---|---|---|
| Motor | 1.5 or 2 HP, depending on the unit | 3 HP |
| Speeds | Four fixed | Four fixed plus stir |
| Timer | 15-minute electric | SmartTimer |
| Bowl lift | Manual crank | Power lift |
| Attachment hub | #12 hub | Listed without hub |
Bowls do not cross over. One Amazon listing for an 80-quart Classic bowl states it does not fit Legacy mixers.
The Hobart HL800-1STD Legacy Planetary Mixer is listed on Amazon at $42,436.80 at the time of writing. See it on Amazon (affiliate link). Other retailers list it between about $37,000 and $46,700. An Adrian’s Pizza owner told Hobart he would buy another Hobart in a heartbeat after upgrading to a Legacy HL800. That testimonial was published by Hobart.
Buying a Used L800
Where they turn up, what condition costs, and who should skip it
Used L800s sell through equipment dealers, and the same model sells at very different prices depending on how much work the dealer has done.
- bakeryequipment.com lists one at $5,355 as-is, $5,950 clean, running and shop tested, or $7,933 reconditioned. Crating, shipping and installation are extra.
- Bake Deco listed a used L800 with bowl and two attachments at $7,995, plus $495 freight.
- City Food Equipment lists a 1.5 HP single-phase unit at $9,195, and a 2 HP three-phase unit with guard at $9,995.
Electrical service is the first question to answer. The listings above cover both single-phase and three-phase units, and a kitchen without three-phase power needs to know which one it is buying.
Peter used other mixers over the years, in other restaurants when he was younger. The restaurants he worked in before the diner all ran Hobarts, and in his experience the name carries the reputation of the best. A machine that has run for 25 years in a working bakery is the argument for it.
The L800 suits a kitchen that mixes real volume and has the floor space and the power for 875 pounds of machine. It does not suit a kitchen that mixes a few quarts at a time. A new Legacy costs several times what a used L800 does, and either way a used machine deserves a test of the motor, the transmission, the guard interlock and the bowl lift before any money changes hands.
For informational purposes only — consult a licensed attorney or financial advisor.
Sources
- Hobart H600 and L800 mixer manual: https://manualmachine.com/hobart/h600/1566845-user-manual and https://kitchen.manualsonline.com/manuals/mfg/hobart_corp/h600.html?p=3
- Hobart L800 spec sheet F-7512: https://manualmachine.com/hobartfoodmachines/l800/5196534-user-manual
- Hobart blog, when to replace a mixer: https://blog.hobartcorp.com/blog/when-should-you-replace-your-mixer
- Hobart blog, Adrian’s Pizza: https://blog.hobartcorp.com/blog/adrians-pizza-upgrades-to-hobart-legacy-hl800-mixer
- bakeryequipment.com L800 listing: https://bakeryequipment.com/product/19443/
- Bake Deco L800 listing: https://www.bakedeco.com/detail.asp?id=71122
- City Food Equipment L800 listings: https://www.cityfoodequipment.com/products/hobart-80-qt-mixer-used-l-800-1-phase-no-guard and https://www.cityfoodequipment.com/products/used-hobart-l800-w-guard-80-quart-dough-mixer-2-hp-3-phase-200-volts
- Parts Town L800 parts: https://www.partstown.com/m/hobart/l800
- KaTom HL800-1STD: https://www.katom.com/617-HL8001STD.html
- WebstaurantStore HL800-1STD: https://www.webstaurantstore.com/hobart-legacy-hl800-1std-80-qt-commercial-planetary-floor-mixer-with-standard-accessories-200-240v-3-phase-3-hp/425HL8001STD.html
- Amazon product pages: https://www.amazon.com/dp/B07G658RL5, https://www.amazon.com/dp/B00IRHX2P8, https://www.amazon.com/dp/B07BDQLMXS, https://www.amazon.com/dp/B07846NQFJ, https://www.amazon.com/dp/B00AWU1TWQ
- Hobart attachment hub video: https://www.youtube.com/watch?v=PipO_J7BzKc
- Used-equipment listing noting a hub problem: https://bakedeco.com/detail.asp?id=42680
